小卫星编队飞行的相对运动学方程研究

以运动学方法为基础研究了编队卫星相对运动的一种更直接方法，利用不同天体力学特性，将相对位置和速度与相对轨道参数建立了联系，首先，详细推导了以运动学方法为基础的相对运动方程，据此可直接得出环绕卫星的轨道根数，其次，为有利于相对轨道分析和设计，对相对运动方程进行了简化，最后，通过例子验证了该方法的正确性，仿真结果表明该方法是有效可行的。     

火箭型单级入轨（SSTO）的初步分析

火箭型单级入轨（ＳＳＴＯ）是今后的发展方向之一，从多方面分析了火箭型单级入轨（ＳＳＴＯ）方案的可能性，简要回顾了ＳＳＴＯ的发展历史，特别对三角快帆（ＤＣ－Ｃｌｉｐｐｅｒ）作了分析，认为采取多项先进技术后是完全可以实现的。明确了单级入轨的两个基本方向：提高比冲和降低结构重量。分析了采用不同形式发动机的影响，列出了主要关键技术，最后提出了几个有参考价值的观点。     

深空探测器定位在共线平动点附近的线性策略

深空探测器需要定位在日-地(月)系的共线平动点L1或L2附近执行探测任务,但由于共线平动点的不稳定性,必须在运行期间进行轨控。对于条件周期轨道(如晕轨道)必须在控制过程中考虑高次项,控制条件复杂,技术上实现相对困难。而某些探测任务,探测器定位在共线平动点附近的条件拟周期轨道(对应L issajous轨道)上亦可以。这种类型的轨道可以离共线平动点较近,那么只需要在控制过程中考虑线性项即可,控制条件简单。以圆型限制性三体问题作为基本模型,采用预估-校正法逼近线性化模型下的目标轨道,给出在轨运行期间的轨控策略亦是可取的,这种控制措施相对而言较简单,容易实现。仿真计算结果表明是可行的,能够提供较高的位置精度。     

编队飞行卫星轨道的初步设计研究

使用两体相对运动的Hill方程进行小卫星编队飞行队形的初步设计，给出了编队飞行中各绕飞小卫星的轨道要素确定过程。以空间圆形编队为例，在未考虑摄动的情况下，通过仿真验证了设计的有效性。     

Families of halo orbits in the elliptic restricted three-body problem for a solar sail with reflectivity control devices

Solar sail halo orbits designed in the Sun-Earth circular restricted three-body problem (CR3BP) provide inefficient reference orbits for station-keeping since the disturbance due to the eccentricity of the Earth’s orbit has to be compensated for. This paper presents a strategy to compute families of halo orbits around the collinear artificial equilibrium points in the Sun-Earth elliptic restricted three-body problem (ER3BP) for a solar sail with reflectivity control devices (RCDs). In this non-autonomous model, periodic halo orbits only exist when their periods are equal to integer multiples of one year. Here multi-revolution halo orbits with periods equal to integer multiples of one year are constructed in the CR3BP and then used as seeds to numerically continue the halo orbits in the ER3BP. The linear stability of the orbits is analyzed which shows that the in-plane motion is unstable while the out-of-plane motion is neutrally stable and a bifurcation is identified. Finally, station-keeping is performed which shows that a reference orbit designed in the ER3BP is significantly more efficient than that designed in the CR3BP, while the addition of RCDs improve station-keeping performance and robustness to uncertainty in the sail lightness number.     

地球同步轨道薄膜太阳帆的姿态轨道控制方法

薄膜太阳帆（FSS）是集推进、发电和姿轨控功能于一体化的超大型挠性太阳帆式航天器，通过调整薄膜反射率产生可变推力和力矩，实现其姿态和轨道运动控制。结合薄膜太阳帆在地球同步轨道运行时的受力特性进行了轨道漂移分析。通过建立薄膜太阳帆动力学模型及受力模型，提出了调整帆面角度轨道修正方法以及基于薄膜光压力矩角动量卸载的长期在轨对日定向面内双轴动量轮稳定控制方法。通过系统仿真验证表明所提的轨道修正和对日定向控制方法是合理有效的，可使薄膜太阳帆长期在定点位置维持对日定向。     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

基于卫星和星敏感器的冗余激光惯组在轨标定

采用高精度卫星导航速度、位置信息以及星敏感器提供的姿态信息设计十表冗余捷联惯组的标定模型,包含陀螺和加速度计的零次项和标度因数,对卫星和星敏感器辅助的冗余激光陀螺捷联惯组进行实时在轨标定.利用标准Kalman滤波和Sage-Husa自适应滤波作为估计算法,对十表冗余捷联惯组参数进行在线估计.数值仿真结果表明:参数标定精度均在7％以内,是一种实时的在轨标定方法,满足误差补偿要求.冗余惯组在轨标定方法为航天器高精度定姿和定轨提供了一种理论参考.     

自主机动条件下的实时定轨方法

中继卫星在跟踪自主机动用户目标时,由于机动轨道未知,需要利用中继卫星下传的星载GNSS(Global Navigations Satellite System,全球导航卫星系统)数据进行实时轨道确定与预报,为中继卫星跟踪提供实时的引导信息,以方便中继卫星快速捕获目标和连续稳定跟踪。针对该类用户目标的任务需求,讨论了基于星载GNSS数据自主机动条件下的实时定轨方法,建立了连续推力机动力学模型。以某一型号卫星的实测数据进行分析验证,并对轨道机动进行辨识,计算的机动加速度和机动时间与试验单位提供的结果一致。针对卫星不同机动情况,5min的观测数据定轨预报10min的弧段,最大位置误差小于8km,可以为中继卫星快速捕获提供高精度的引导信息。     

低轨卫星月影事件预报优化

针对卫星月影问题,提出了一种低轨卫星优化的月影预报策略,可以有效提高目前低轨卫星在轨管理时对月影事件预报的效率.结合仿真对产生月影事件的太阳、地球、月球的三体关系进行了分析,首先给出了月影产生的解析分析方法,并通过对一个三维月影影响模型的分析,得到了月影影响区间的判定要素——月影临界角;然后进一步通过对月影临界角的分析,提出了基于太阳与白道面的位置关系和月影临界角对低轨卫星月影事件的优化预报方法;最后基于大量的随机低轨卫星场景对本方法的正确性进行了验证.研究结果表明,此方法能够较大地提高月影预报效率,可以将月影预报频率从每月1次降低到每年2次,从而简化了低轨卫星在轨运行管理的任务复杂度,为卫星的在轨可靠运行提供支持.